If we find any problems with the rectifier diode, we can also measure it ourselves if we are not professional. Beginners can also use a multimeter. Before testing, first turn the multimeter's conversion switch to the RX1K position in the ohms range, and then short-circuit the red and black probes to zero the ohms.
Categories：Product knowledge Date：2024-12-20 Hits：478 View »
The structure of the rectifier bridge stack was mentioned in the previous draft, one of which is composed of two diodes.
Categories：Product knowledge Date：2024-12-19 Hits：446 View »
Generally speaking, the forward voltage drop of fast recovery diodes is small, around 0.4V, while that of ordinary silicon transistors is around 0.6V. To reduce losses, fast recovery diodes are used.
Categories：Product knowledge Date：2024-12-19 Hits：469 View »
Generally speaking, the forward voltage drop of fast recovery diodes is small, around 0.4V, while that of ordinary silicon transistors is around 0.6V. To reduce losses, fast recovery diodes are used.
Categories：Product knowledge Date：2024-12-19 Hits：475 View »
Surface mounted rectifier diodes generate heat during operation, and excessive heating can accelerate their service life. Therefore, the cooling system of rectifier diodes is developed.
Categories：Product knowledge Date：2024-12-18 Hits：469 View »
When checking the rectifier diode circuit with a meter after use, it was found that the rectifier diode had become sluggish.
Categories：Product knowledge Date：2024-12-18 Hits：559 View »
What is the main role of Schottky diodes in circuits?
Categories：Product knowledge Date：2024-12-18 Hits：424 View »
The operation of a rectifier diode may not be well understood by many people. It is a diode device that converts alternating current energy into direct current energy. Typically, it includes a PN junction with two terminals, an anode and a cathode.
Categories：Product knowledge Date：2024-12-17 Hits：509 View »
First of all, we need to know that fast recovery diodes are also a type of rectifier diode. Of course, the replacement issue still depends on the specific situation.
Categories：Product knowledge Date：2024-12-17 Hits：433 View »
We all know that a rectifier bridge is composed of multiple diodes, with one end of the load being positive and one end being negative, and the two ends connected to the voltage being positive and negative. So how can diodes be made into rectifier bridges?
Categories：Product knowledge Date：2024-12-17 Hits：571 View »
